"One Perfect Part at a Time"

Dan'l

Hey! So you clicked my name! Thanks for visiting The Hobbyist's Machine Shop Blog.

Machining in the 4th Dimension

The fourth dimension is often mentioned in science fiction as a dimension beyond the human senses. Today, real scientists (if there are such people) claim the fourth dimension does exist. But there are IMHO plenty of pseudoscience, especially promoted as video “entertainment.”  Material for a future rant…

In machining there really IS a fourth dimension. Usually called the 4thaxis. The Hobbyist Machine Shop (THMS) has a fourth axis for use on the Taig micro mill. It’s been on both the mill used for metal machining as well as the wax milling machine. Currently it is on the Taig… Continue reading

Fanning the Coals

It’s no secret one of my lusts is machining in metal and wax. Actually, machining any material is fine with me. Wax became my favored material because it machines so well, especially with very small tool bits. Primarily, jewelry CNC carving for lost wax casting (LWC).

But I have also machined wax for LWC casting in brass, and that also works very well. I am not involved with casting large objects. At least not yet. But I don’t have an interest in doing large scale sand mold type casting. That’s a whole ‘nother sideline.

My light weight Taig equipment is… Continue reading

Ring Carved on 4th Axis

Everything came together for the first real use of the forth axis mandrel for ring carving. It’s nice when the plan comes together and everything works as intended. There was of course far more than just making the mandrel. There is the CAD design stage and the CAM (Desk Proto) for generating the G-code for the 4th axis. Then running the G-code on the micro-mill. I use LinuxCNC and I had to write my own metric post processor for Desk Proto. Not all that hard, actually. I made a USC (inch) version too. One tiny code change.

The first picture… Continue reading

Wax Carving Mandrel

Wax Carving Mandrel

Plastic prototype and machined steel wax carving mandrels.

This is the finished mandrel turned from 12L14 steel as well as the prototype that was 3D printed. The steel mandrel will hold the green wax (in the photo) that will be machined into a ring on the rotary 4th axis of the Taig CNC micro mill. A 1/4-20 thumb screw will be fitted into the end for drawing down the cap, acting as a clamp for the wax.

The wax is purchased in a tube with the center hole existing. The wax will be sliced in widths greater than the ring… Continue reading

DeskProto for 4th Axis

Using 4 axis milling, requires a CAM software system to create the necessary CNC G-code. It’s not something one can easily hand code when doing 3D designs. Simple level surfacing could be hand-coded on a 4thaxis, but probably lathe turning would be far easier.

Aspire, a three-dimensional CAD/CAM produced by Vectric can produce G-code for the 4thaxis. It is one of my go-to programs. However, I don’t design everything in Aspire CAD. Fusion 360 and RhinoCAD are also programs I use for design.

Both these programs have 4 axis CAM built in. Fusion 360 has a… Continue reading

1 2 3 63
Categories
NOTE: Log in is for admin and members only, not required to post comments.